1. The conventional identification methods: Sensory
The so-called counterfeit parts, must be authentic replica of the original parts, they are also possible counterfeiting on labeling, packaging and other details, so it is easy to confuse. Due to the nature of low-cost low-quality counterfeit goods, it can not do the same on the genuine sense, so our first step is to identify areas to be identified through these. Genuine accessories manufacturers for mass production, packing specification, packaging will also focus on quality and craftsmanship. If you see yourself fitting packaging fuzzy, dark color, that likelihood is fake. Also original parts in the box (or bag) marked on the product specification information and manufacturer information, the packaging should have certification and inspection procedures. Counterfeit goods often also the easy way in this regard.
 2. Next is to look at parts itself from the process quality, especially to distinguish the details. Counterfeit parts are subject to processing, often in the details very rough. Some accessories (such as brake pads) but also through the "smell taste" way, they tend to use inferior materials, there will be a pungent smell, there will not be authentic.
Such better identify counterfeit goods, as seems to have been very false, and sometimes direct sellers themselves would say this is fake. Afraid afraid of those very hard surface under the article, but the inner parts with fake and shoddy material, which requires some specialized knowledge of.
 3. to compare with the real thing is the most effective way to identify
The so-called "fear not know what afraid of confinement", do another, like really fake goods, they can not do exactly the same with the real thing, because it will increase the production cost, thus losing the false sense accessories. Able to do so, you can buy accessories accessory is found to be true than right, but very few people have this condition, then we need to remember their car some common characteristics of the parts. Here we Shanghai GM's parts, for example, explain some of the differences between true and false parts.
 (1) differences in details
  1) Figure winning "1" of the place is four notches, which is unique to authentic, not counterfeit goods.
  2) genuine alarm is silver spring, if the spring alarm accessories using black or other (torture) color, will undoubtedly be fake.
  3) genuine buffer sheet specially designed two noise reduction notch on counterfeit products generally do not have.
Then to the oil filter, for example, genuine and counterfeit goods in the details also have a greater difference. Genuine structure pitch type, if a paragraph accessory uses are similar legend rounded design, it must be fake.
 (2) on different materials
Material genuine brake pads rough surface, which requires specific processing, counterfeiting in general will be more smooth.
 Different markings on (3)
 Genuine brake pads using the unique green print fonts, if you did not use the selected accessories such identification may be figuring it was fake accessories.
Far above our differences to identify the authenticity of the conventional methods and a few accessories authenticity between a simple introduction and description. In fact each car parts are different, there are differences in the standard of workmanship. These items from the above illustration, the counterfeit goods is largely spurious level can be done almost, if not carefully compared with the genuine resolution, the average person is very difficult to see out of. To truly "eyes", but also requires very specialized knowledge and experience, which for us ordinary car owners seem a bit unrealistic. Once discern error, the post "tuition" is not just businesses deceived so simple, it will be a direct threat to traffic safety. So for the vast majority of ordinary family car owners, to avoid the dangers of counterfeit parts, the easiest way is to go to the 4S shop for repairs and maintenance.